Non toxic, very shiny, vinyl Plastisol used for coating metals (ferrous, light alloys, copper alloys, stainless steel, etc.) for protective, technological and decorative applications. It adheres perfectly to the metal surface through the proper use of a suitable primer. In this way it differs form coatings utilizing PVC sheets which often age rapidly and come away from the metal support.

CHARACTERISTICS

Type of Polymer : Polyvinyl Chloride
Monomer Vinyl Chloride in Plastisol in the state of supply and after baking: absent
Specific weight at 25°C : 1.2 ± 0.05
Viscosity at 25°C : 5 – 8 Pa.s
Colour: supplied in any colour
Baking temperature in a hot air circulation oven: 170° - 200° C
Duration: depends on the mass of metal to be heated
Hardness: 50 – 70 Sh A
Dielectric rigidity: 250 V eff/0.01 mm thick
Adherence: the use of our “Primer type 200” or 200 G is necessary. The part to be covered must be perfectly free from grease and oxide (preferably sanded).
Toxicity: non-toxic, both in its initial form and after baking.

USES

Particularly indicated when the decorative effect is predominant. E.g.: handles, grips on pliers, etc.All metals and alloys can be used; particularly suitable for copper and copper alloys.

Plastifying and painting

Products aimed at protection and atmospheric agents

USES