 |
 |
||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
 |
 |
|
CHARACTERISTICS Polymer type: Polyvinyl chloride Monomer vinyl chloride after firing: absent Specific weight at 250°C: 1,2 ± 0,05 Viscosity at 250°C: 5 - 8 Pa.s Colour: any colour can be supplied Firing temperature in hot air circulation oven: 170 - 200 C Time: depends on the metal mass to be heated Hardness: 50 - 70 Sh A Dielectric rigidity: 250 V eff/0,01 mm thickness Adhesion: It is necessary to use our "Primer type 200" or 200G. The part to be coated must be perfectly degreased and without oxides (preferably sanded) Toxicity: Non toxic. Both before and after firing.
|